Stampede 4X4 Brushless Logo

Bigger and Stronger than Ever!

Stampede® 4X4 is bigger and stronger than ever with a new clipless body, extended chassis, and huge 5.3″ Sledgehammer® tires for an aggressive monster truck stance. Stampede’s all-new BL-2s brushless power system delivers effortless power for all-day fun with an added boost of torque for terrain-shredding burnouts and powerful acceleration. Stampede 4X4 also comes standard with Traxxas’ Extreme Heavy Duty Upgrade Kit to become the new standard for strength and durability.

Stampede 4X4 Brushless (#67154-4)
New BL-2s Brushless Power System

New BL-2s Brushless Power System

Stampede 4X4’s BL-2s brushless power system ramps up the fun with up to 60% more speed and faster acceleration than comparable brushed power systems. Improved efficiency, high-speed ball bearings, and an internal cooling fan allow Stampede 4X4 to run battery after battery for all-day fun. With no brushes to wear out, the BL-2s 3300 kV is long-lasting and requires virtually no maintenance.

Extreme Heavy Duty Upgrade Kit

Extreme Heavy Duty Upgrade Kit

Stampede 4X4’s factory-installed Extreme Heavy Duty Upgrade Kit replaces key drivetrain and suspension components with beefed-up parts made for ultimate strength and durability. From the HD suspension arms to the steel wheel hubs, this is the strongest driveline ever offered in a Stampede.

Clipless Body Mounting

Clipless Body Mounting

Stampede 4X4 now uses a clipless body latching system for secure mounting and fast, one-handed removal and installation. A rugged internal cage attaches to the body with molded reinforcements to prevent pull-through damage. Tough roof and tailgate skids protect the body in the event of a rollover.

Available Now In-Store and Online!
Model #67154-4$329.95

Video

Innovation

Details

Stampede 4X4 Chassis Click for Details Sledgehammer Tires and 2.8″ Graphite Gray Wheels Oil-Filled Ultra Shocks Secure Body Latch Long-Travel Suspension Extended Battery Tray and Hold-Down Traxxas High-Current Connector Modular Chassis Digital High-Torque Waterproof Steering Servo Waterproof Receiver Box 3-Channel Receiver with Fail-Safe Security Dual Bellcrank Steering with Servo Saver New ProGraphix Body & Secure Body Latch Heavy Duty Suspension Arms Hex Hardware Extreme Suspension Components Reinforced Front and Rear Bumpers Stampede 4X4 Driveline Click for Details Large 32-Pitch Gears Upgraded Slipper Clutch Maxx-Duty® Driveshafts Sealed Steel-Gear Differentials

Make sure you don’t miss any of the latest Stampede 4X4 Brushless news, accessories, and updates.

Stampede 4X4 Brushless Data

Length: 17.87 inches (454 mm)
Width: 13.10 inches (333 mm)
Ground Clearance: 2.44 inches (62 mm)
Weight: 5.98 pounds (2.7 kg) without batteries
Height: 8.34 inches (212 mm)
Wheelbase: 11.62 inches (295 mm)
Front Shock Length: 3.45 inches (88 mm) - Long
Rear Shock Length: 3.98 inches (101 mm) - XX-long
Tires (pre-glued): 5.3 inches (133 mm) tall Sledgehammer®
Wheels: 2.8 inches (71 mm) graphite gray wheels
Speed Control: BL-2s electronic speed control
Motor (electric): BL-2s 3300 kV sensorless brushless
Gear Pitch: 32 pitch
Overall Drive Ratio: 15.36:1
Differentials: Hardened steel bevel, sealed, limited slip
Chassis Structure / Material: Modular composite tub
Brake Type: Electronic
Drive System: Shaft driven 4WD
Steering: Dual bellcrank with integrated servo saver
Radio System: TQ 2.4 GHz (2-channel)
Servo: Waterproof 2075
Skill Level: 1
Battery Compartment: 162 mm x 47 mm x 26 mm
Required Batteries: 4 “AA” (transmitter), Vehicle (see battery finder)
Traxxas BL-2s 3300 Brushless Motor (3384)
Type: BL-2s 3300 kV sensorless brushless motor
Weight: 7.51 ounces (213 g)
Length: 3.15 inches (80 mm)
Diameter: 1.42 inches (36 mm)
Connector Type: Traxxas Quick Connect Motor Plug
Traxxas BL-2s Waterproof ESC (#3383)
Input Voltage (cells): 6-7 Cells NiMH / 2s LiPo
Case Size: 1.53″ (39 mm) x 2.31″ (59 mm) x 1.21″ (31 mm)
Weight: 3.07 ounces (87 g)
BEC Voltage: 6.0 volts
Reverse Delay: Yes, with lockout
Thermal Protection: Two-stage thermal shutdown
Ports: Auxiliary fan
  • BL-2s Waterproof Electronic Speed Control
    • Heat sink accepts accessory cooling fan (3340)
    • Three Programmable Drive Profiles
      • Sport Mode - Forward / Brake / Reverse
      • Race Mode - Forward / Brake
      • Training Mode - 50% Forward / Brake / 50% Reverse (patented)
    • Traxxas EZ-Set® one-button setup
    • Built-in two-stage low-voltage detection for LiPo batteries
    • NiMH battery packs: 6-7 cells (7.2 to 8.4 volts)
    • LiPo battery packs: 2 cells (7.4 volts)
  • 3300 kV Brushless Motor
    • Integrated cooling fan
    • Low-maintenance design
    • Efficient ball bearings
    • 3300 kV
  • TQ 2.4 GHz Transmitter
    • Full-size 2-channel transmitter
    • All-day comfort with precise long-range control
  • Extreme Heavy-Duty Upgrade Kit Installed
    • Strengthened C-hubs, axle carriers, and steering blocks
    • Extreme heavy-duty driveshafts
      • Oversize diameter
      • 6 mm axles
      • Steel wheel hexes
  • Clipless ProGraphix® Body
    • Tough reinforced bumpers
    • Reinforced inner cage
    • Rugged roof rollover protector
    • Tailgate protector
    • Holds tight for intense action
    • Quick and easy removal
  • Chassis
    • Modular composite tub design
    • Secure battery hold-down latch
    • High angle bumpers
  • Suspension
    • HD-composite suspension arms
    • Oil-filled Ultra Shocks
    • White powder-coated springs
  • Steering
    • Chassis-mounted #2075 servo
    • Dual bellcrank design with integrated servo saver
  • Drivetrain
    • Full-time shaft-driven 4-wheel drive
    • Sealed steel gear front and rear differentials
    • Large 32-pitch steel spur gear
  • Wheels and Tires
    • Large 2.8″ graphite gray wheels
    • Tall 5.3″ Sledgehammer® tires
  • Sealed Ball Bearings
  • Hex hardware with Rust-Resistant Black Oxide Coating
MODEL 67076-4: Stampede® 4X4 BL-2s: 1/10 Scale 4X4 brushless monster truck, fully-assembled, waterproof electronics, Ready-To-Race®, with TQ 2.4 GHz 2-channel radio system, BL-2s speed control, and clipless painted body. Requires: battery and charger.

What’s In The Box:

  • Stampede 4X4 with BL-2s ESC and 3300 kV motor
  • Quick Start Guide
  • TQ 2.4 GHz radio system
  • High quality maintenance tools

What You’ll Need:

  • Batteries

    Stampede 4X4 requires a single NiMH or LiPo battery. See full list of batteries

  • Charger

    Traxxas EZ-Peak® Live charger (2971) is recommended for easy and fast charging performance

  • AA Alkaline Batteries

    Four AA alkaline batteries for the transmitter